Products

Harmonic Gearbox - Hat Type

SSHG Series
Product Description
  • Diverse appearance; suitable for robot arm.
  • Precision: less than 20 Arc-sec.
  • Torque Capacity: 3.5Nm to 500Nm
  • Available reduction ratios 1:50 ,1:80, 1:100, 1:120, 1:160
  • Short axial dimension.
  • High rigidity for stable precision work.
  • More compact and higher accurate.
  • Applied in robot industry, especially for multi-axis robot joints.
Harmonic Gearbox With Hollow Shaft End | SSHG17-50-2UH

Harmonic Gearbox - Hat Type

  • Specification Chart
  • Download Catalogue
Performance Unit Ratio SSHG14 SSHG17 SSHG20 SSHG25 SSHG32 SSHG40 SSHG45
Nominal Output Torque kgf*m/Nm 50 0.55/5.4 1.6/16 2.5/25 4/39 7.8/76 14/137 18/176
80 0.8/7.8 2.2/22 3.5/34 6.4/63 12/118 21/206 32/313
100 0.8/7.8 2.4/24 4.1/40 6.8/67 14/137 27/265 36/353
120 - 2.4/24 4.1/40 6.8/67 14/137 30/294 41/402
160 - - 4.1/40 6.8/67 14/137 30/294 41/402
Maximum Acceleration Torque kgf*m/Nm 50 88 150 220 450 980 1,800 2,700
80 110 200 350 680 1,400 2,800 3,900
100 84 160 260 500 1,000 2,100 3,100
120 - 120 240 470 980 1,900 2,800
160 - - 220 450 980 1,900 2,600
Emergency Stop Torque kgf*m/Nm 50 1.8/18 3.5/34 5.7/56 10/98 22/216 41/402 51/500
80 2.4/23 4.4/43 7.5/74 14/137 31/304 53/519 72/706
100 2.9/28 5.5/54 8.4/82 16/157 34/333 58/568 77/755
120 - 5.5/54 8.9/87 17/176 36/353 63/617 84/823
160 - - 9.4/92 18/176 38/372 66/647 90/882
Permissible Input Speed rpm 50/120 3,500 3000
Standard Backlash arc min 50 36 20 17 17 14 14 12
80 23 13 11 11 9 9 8
100 18 10 9 9 7 7 6
120 - 8 8 8 6 6 5
160 - - 6 6 5 5 4
Rated Operation Life hr 50/160 >10,000 At permissible input speed and nominal output torque.
Operating Temperature °C 50/160 -10 °C to 40 °C (ambient) / 90 °C (case maximum temp.)
Lubrication - 50/160 4B No.2
Ingress Protection Class IP 50/160 IP54
  • At permissible input speed and Continuous Output Torque
  • At input speed of 1000 rpm
  • Efficiency = 85% at permissible input speed and full load
  • Permissible axial load or permissible radial load is the value that satisfies the reducer life when either a pure radial load or an axial load is applied to the flange face. (When radial load is Lr+R=0mm, and axial load is La=0mm)

SSHG17-50-2UH, SSHG17-80-2UH, SSHG17-100-2UH, SSHG20-50-2UH, SSHG20-80-2UH, SSHG20-100-2UH, SSHG25-50-2UH, SSHG25-80-2UH, SSHG25-100-2UH, SSHG25-120-2UH, SSHG32-50-2UH, SSHG32-80-2UH, SSHG32-100-2UH, SSHG32-120-2UH